Gallery

These Morris-Shea beam and lagging walls were installed as a temporary earth retention system. The…

Morris-Shea Fundex F3500 drill rig is setting up to install a Continuous Flight Auger (CFA)…

Reinforcing steel cages are manufactured by Morris-Shea for installation in most types of deep foundation…

The compact Morris-Shea Fundex CD20 drill rig maneuvered inside the new YouTube Soundstage at the…

This permanent drilled shaft deep foundation (caisson) offered high load bearing capacity and was ideal…

This DeWaal Pile System installation was in close proximity to an urban area with stringent…

This interior view of the 30-ton Morris-Shea Cone Penetration Testing rig (CPT) presents the results…

The installation of marine structures at ports and waterways often requires unique construction techniques such…

Morris-Shea utilized Fundex F3500, Fundex F2800 and Fundex CD20D drill rigs to install DeWaal and…

The Morris-Shea cone penetration test CPT rig incorporates new test results with archival information to…

All aspects of the drilling process and concrete placement are observed and recorded by the…

The Morris-Shea team designed and installed this internally braced cofferdam, constructed of PZ-27 sheet piling,…

Morris-Shea used a Fundex F3500 drill rig to install more than 200 continuous flight auger…

Morris-Shea Fundex CD20D drill rig installs cast-in-drilled-hole (CIDH) deep foundation piles in a restricted access…

Morris-Shea installed 20” diameter pipe piles with 0.5” wall thickness to depths up to 160-feet…

This Raleigh, NC jobsite scene presents a skid loader removing spoils created by a Fundex…

Loading 14-inch casings into Morris-Shea Fundex CD20D drill rig for installation as a permanent CIDH…

This Fundex F3500 drill rig is positioning over a pile point prior to beginning installation…

Morris-Shea designed and installed a steel soldier pile and wood lagging system within the restricted…

Morris-Shea utilizes state-of-the-artautomated welders to fabricate its own steel cages for use as reinforcement for…

Cutter Soil Mixing equipment employs an advanced soil mixing technique utilizing two rotating cutter heads…

Cutter Soil Mixing, CSM, is an advanced soil mixing technique that offers soil retention and…

Cutter Soil Mixing (CSM) panels are formed by drilling overlapping primary and secondary panels to…

Continuous Flight Auger pile installed with Morris-Shea Fundex F3500 drill rig. Our fleet of powerful…

Drilled shafts (caisson) are often installed from temporary work platform at marine jobsites. Morris-Shea pioneered…

DeWaal rigid inclusions are specified to accommodate the variable density of the top fill. The…

Morris-Shea completed a continuous flight auger pile (CFA) deep foundation retrofit at a 1 million…

A remote controlled Fundex CD20 drill rig with 20 ton-meters of torque and 15 tons…

CFA piles are ideal for most soil conditions and preferable on projects that require vibration-free,…

Morris-Shea installed 2,700 18 inch DeWaal Drilled Displacement Piles to depths up to 113 feet…

Morris-Shea’s compact Fundex TTD-50 drill rig was perfectly suited to operate in the tight confines…

The Dos Bocas Refinery Project required the installation of 437 32 inch diameter and 193…

Morris-Shea chartered a ship to transport equipment from Mobile, Alabama to the PEMEX job site…

Shea Brothers Mexico, with equipment support from deep foundation contractor Morris-Shea, completed foundation installations at…

Morris-Shea installed continuous flight auger pile (CFA) for the new Hewson Hall deep foundation construction…

DeWaal rigid inclusions are specified to accommodate the variable density of the top fill. The…

Morris-Shea DeWaal pile was installed at the Mobile, AL Airbus facility as deep foundation for…

Morris-Shea set up a portable concrete plant outside an Amazon distribution center to expedite concrete…

Morris-Shea utilized a Fundex CD20D drill rig for retrofit construction in an Amazon distribution center.

Morris-Shea performed retrofit construction in an Amazon distribution center to accommodate the addition of a…

Morris-Shea utilizes an Automated Monitoring System to assure deep foundation piles are installed to the…

Morris-Shea drove foundation piles for the construction of a residential high rise building in Birmingham,…

Morris-Shea installed a reinforcing steel bar and cage in a DeWaal deep foundation pile.

Morris-Shea installed deep foundation piles at the Calcasieu Pass LNG facility.

A Morris-Shea CD20D drill rig can perform in job site environments where access and work…

Morris-Shea utilized a barge to ferry construction materials to a cofferdam job site on a…

Morris-Shea constructed a cofferdam in a lake at Disney World Orlando to accommodate the installation…

Morris-Shea controls the patent for Western Hemisphere use of the innovative DeWaal Pile System.

The Morris-Shea DeWaal Pile System incorporates a unique sacrificial end plate that disconnects upon reaching…

The Morris-Shea Fundex F3500 is a powerful, fixed mast drill rig capable of applying high…

The Morris-Shea DeWaal pile is a drilled, full displacement, cast-in-place concrete pile. This patented system…

The Morris-Shea DeWaal pile deep foundation construction system provides the same capacity benefits as typical…

The Morris-Shea DeWaal pile is ideal for installation in loose to medium-dense soil profiles, including…

The Morris-Shea field-proven DeWaal pile eliminates pile driving concerns such as hammer noise and vibration,…

Morris-Shea installs marine foundations at shipyards, terminals and other water applications.

Morris-Shea installs marine foundations at shipyards, terminals and other water applications.

Morris-Shea utilizes an original illustration of a CD20D drill rig to demonstrate its ability to…